Sceptre Monitor no Signal? Here’s the Fix

If your Sceptre monitor has gone blank and showing “no signal” message, it can be scary and stressful – but there are several reasons why this could have happened and you don’t need to panic just yet! In many cases, this issue can be solved with the help of a little troubleshooting and by making sure you’ve connected all the necessary cables correctly.

In this article, I’ll will help you figure out why your screen says no signal so that you can resolve the issue as quickly as possible.

Why does my Sceptre monitor say no Signal?

why is my spectre monitor says no signal

There are several reasons why your Sceptre monitor is displaying “No Signal”. The most common reason is that the monitor is not receiving a signal from the computer. This can be due to a number of factors, including loose cables, internal software glitch, hardware-related fault, or a bad connection.

So bellow is some main reasons why your Sceptre monitor can display a “no-signal” error:

  • The monitor may not be properly connected to the computer.
  • The monitor may not be turned on.
  • The computer may not be turned on.
  • There may be a problem with your input device.
  • The resolution or refresh rate on the monitor may be set too high.
  • The video card on the computer may be faulty.




How to fix the Sceptre monitor No Signal error?

In short: To fix the No Signal issue on your Sceptre monitor, check all the connections to ensure they are secure and firmly attached on both sides. Then try a different input on the monitor and restart your computer and monitor. After a reboot, your problem should fix now!

I will explain all of the above possible solutions in further depth below. But before that, look at the following table for a better understanding of this issue…

Sceptre Monitor is on, but no signal
Reasons Solutions
Loose connection Check the Connection
Faulty input Device Repair it
Too much Input Lower the input rate
Faulty video card Update it
Software Glitch Reboot/Reset

1. Loose cable connection

sceptre monitor says only no signal

A loose video cable connection is one of the most common reasons that can trigger this issue. Most electricians say that the primary reason for a monitor or TV to show a no-signal message is the loose or damaged video or antenna cable connection that sends the signal from the CPU to the monitor.

So, when you see this message on your computer monitor, you should first check the video cable connections between your computer and monitor. Make sure that the video cable is securely connected to both the monitor and the video input on your computer. Whatever cable (DVI, HDMI or VGA) you are using, ensure that the cable is securely connected to both the monitor and the video input.

Also ensure that the video input is set to the correct input. For example, If you’re using a HDMI cable, make sure that the video input is set to HDMI.




2. Software Glitch

sceptre monitor no signal because of software glitch

A Software Bug, also known as a “Software glitch,” is a common issue for almost all electronics, including TVs, monitors, and other networking devices. Generally, a software glitch causes a device to start misbehaving, like stopping working some function suddenly or not working completely.

So your monitor may be facing a temporary glitch in its operating system, preventing it from decoding the signal that the CPU is sending. In this case, a factory reset can solve your problem.

You can reset your Sceptre monitor by pressing and holding the power button for about 60 seconds. It will fix any software-related error, recover your monitor to its default mode, and fix your issue.




3. Monitor is malfunctioning

monitor may be not working

If your Sceptre monitor is still displaying “no signal,” there may be a problem with the monitor. Try connecting the monitor to a different computer to see if the problem persists.

If the problem does not persist, then the problem is most likely with the computer. If the problem does persist, then the problem is most likely with the monitor.

4. Problem with the source device

sceptre monitor not displaying any signal

Let me ask you one thing: did you even turn on your CPU? Or you just turned on your monitor instead of powering on the CPU first?

We occasionally forget to turn on the computer after turning on the monitor. Until it detects a reliable video signal from the computer or source, the monitor will show a “No Signal” warning. So, please make sure your computer is turned on.

If your computer is turned on and you have checked the cable and cable connections, but you are still getting a No Signal message from your Sceptre monitor, check this by:

  • Connecting another display with your computer.
  • Connecting the same display with another computer.




5. PC’s Hardware Issue

sceptre monitor having signal issue

If none of the above steps doesn’t work and your Sceptre monitor is still displaying the No-Signal message, there is a probability that one of your PC’s internal components, like the graphics card, is faulty or the RAM stick is dusty. In this case, checking and cleaning can both fix this issue.

Before you disassemble your PC, make sure your computer is turned off. Also, unplug all cables, including the power cord, which will help you to avoid electric shock.

After then, open the PC’s back case and locate the graphics card first, as this is the most likely to cause a no-signal issue if it is loose or damaged. Then check the RAM sticks. If the RAM stick is dirty or dusty, clean it.


FAQ

1. Nothing worked! What to do?

Unfortunately, suppose none of those mentioned above methods work and your monitor is continuously displaying the same warning “no-signal”. In that case, your monitor may be damaged, or your PC’s internal component may be broken.

In this case, visit your nearest electronics repair shop or call an experienced repairer and ask him to look into it. You can also contact Sceptre customer care and discuss your situation with them about your issue. But to get free service, your monitor must have a valid warranty.

2. My Monitor shows no signal, but the CPU is running.

If your monitor is showing no signal, but your CPU is running, likely, your monitor is not receiving a signal from your CPU. The problem could be with the monitor or with the cable connecting the monitor to the CPU.

First, try connecting to another monitor to see if that works. If it does, the problem is with the primary monitor. In this case, you have to buy a new one or repair it. But If the second monitor does not work, then the GPU is not working correctly, or your monitor isn’t receiving any signal from your PC.

5 Best Shows on Netflix You’ll be Addicted to Right Now! 2022’s Best Speaker Brands: Find Out Which Ones Are Worth Your Money 2022’s Best Home Security Systems: Protect Your Home Like a Pro 10 Energy-Saving Smart Home Gadgets You Didn’t Know You Needed These Smart Devices Will Simplify Your Baby’s Bedtime Routine