If your Westinghouse TV is not turning on, it indicates a problem with the power button, power cord, or the TV’s internal components.
Most of the time it’s due to the faulty power supply but often a temporary system glitch triggers this.
However, this article will break down everything in detail about why your Westinghouse TV won’t turn on and exactly what you have to do to get the TV working again.
Let’s dive in…
Why is my Westinghouse TV won’t Turn on
Your Westinghouse TV won’t turn on because either the power cord is disconnected, the TV is not plugged into an outlet, the outlet is not working, or there could be an issue with the TV itself.
Here’s the possible culprits:
- A damaged or disconnected power cord.
- A malfunctioning outlet.
- A temporary software glitch.
- Or an issue with the TV itself
How To Fix Westinghouse TV Not Turning On
Here are the detailed guidelines:
Step 1: Check Your TV’s Power Source
A proper power connection is required to turn your TV on. Ensure that your TV has a sufficient power supply and that the power connector is correctly plugged into the power outlet.
If the power cable is plugged in correctly, the power supply may be damaged.
You can identify if the problem is with the power outlet or not by,
- Plugging another device (like a mobile charger) into that power outlet. If your mobile phone is charging, the power outlet is working correctly.
- But if it doesn’t charge, the power outlet is undoubtedly damaged.
If this is the case, change your TV’s power outlet, and your Westinghouse TV will start working again.
Step 2: Soft reboot your TV
The second thing you should do is unplug your TV from the power outlet and let it rest for about one minute.
But it could be the most effective method to get your Westinghouse TV back on.
Wait at least 60 seconds after unplugging. Be patient and ensure it’s been at least a minute before plugging it back in. While unplugged, find and press the power button on your TV for 30 seconds. Ensure you’re pushing the power button on your TV rather than the remote!
This will help to drain any remaining power from the TV and allow it to soft reset. This isn’t the same as simply turning the TV on and off!
After 60 seconds, plug the TV back in, and it should power on without a glitch. If your Westinghouse TV is still not turning on, move on to the next step.
Step 3: Check the TV’s Cable for any damage!
Still not turning on? Well, the next step is to test the power cable that is connected to your TV.
The power cable transmits electrical currents and helps run your TV.
If it gets damaged, your TV will not be able to turn on. So, check the power cable for any visual damage. If needed, replace it.
If you’re still using the old cord, you should replace it with a new one because the old wires may have internal or external damage. Also, disconnect and then reconnect the HDMI cable. It will sometimes fix the signal issue if your TV is facing this!
Step 4: Check your Remote
Oh, I forgot about the prominent leader.😆
There’s a good chance that the remote you use to turn on your TV no longer works.
It could be that the battery on your remote is dead or the entire remote control has been damaged.
Remove the batteries from the remote and reinsert them. If reinserting the battery fails, try replacing the battery set because they wears out over time.
But the remote may have stopped functioning if you’ve recently replaced the batteries and don’t believe they’ll be worn out. As a result, you must replace the remote in this case.
You should contact Westinghouse customer service to request a replacement remote because it is better to use store-bought remotes than local ones!
Step 5: Factory reset your Westinghouse TV
Sometimes, your TV may not turn on due to an internal software-related error, and a factory reset can fix this bug.
- Locate the little reset button on the back of your TV.
- Depending on the model, this could be on your device’s right, left, or bottom.
Once you find it, press and hold the reset button with a ballpoint pen for about 15 seconds, The Westinghouse logo will appear on the screen as soon as you press it. Now, wait for it to finish the process.
Step 6: Your TV’s backlight has been damaged
If nothing else has worked thus far, it’s likely that your Westinghouse TV’s backlight is worn out.
However, There is an easy way to ensure this.
Turn on your TV, hold a flashlight, and bring it close to the screen. When you flash the light, look closely to see whether there is any image on the screen.
If you see a picture, but it’s very dim, it’s most likely because your TV’s backlight has been damaged and needs to be replaced.
Disconnect any third-party devices that are connected to your TV. Those malfunctioning devices may be preventing your TV from turning on.
Step 8: The motherboard has been burned
It’s possible that your TV’s motherboard was burned due to overelectricity flow.
It could be due to a recent storm. Unfortunately, the only way to be sure is to remove the back panel of your TV.
After removing the back panel, you will see a few boards, with the motherboard on the left and the power board on the right.
To make sure the problem isn’t with the power board, turn on your TV and then unplug the cable that connects the motherboard to the power board from the power board side.
If the TV continues to light up, your TV’s motherboard has been damaged, but the power board is still okay.
Motherboards are affordable to replace; before buying a replacement part, double-check the numbers on the board to ensure you get the exact replacement. Alternatively, hire a TV repairer if you’re not confident in your ability to handle this yourself.
Q. Nothing worked! What next?
I tried to include numerous troubleshooting options for those having problems turning on their Westinghouse TVs.
Q. My Westinghouse TV Is Stuck in Picture Mode!
Follow these simple steps to fix your TV if it’s stuck in image mode.
- First, turn off the TV.
- Keep your remote control close to the TV.
- Continuously press and hold the “Menu” and “Power” buttons.
Your television will turn on usually and will no longer be stuck in image mode. But if your TV is stuck on the logo screen, read our complete guide from the above link to fix it quickly.
Q. Why won’t my Westinghouse TV turn on, but the red light is on?
If your Westinghouse TV won’t turn on but the red light is on, it’s most likely a remote control issue.
It’s possible that the remote’s batteries have run out (or the contact has broken) or that the window for receiving signals from the remote on the TV has been blocked by anything.
Make sure the batteries are firmly attached to the battery compartment of your remote, and also ensure that there is no obstruction between your remote and the TV.
Check out our step-by-step guide to fixing a Westinghouse TV with power but no picture issue.
Q. My Westinghouse TV won’t stay on after a power outage.
To fix the issue, you should first run a power drain cycle on your TV.
First, remove the power cord from the TV, then press and hold the power button for 10–30 seconds to drain any residual power.
Now try turning on the TV by reconnecting it to the power outlet.
Abdul Kader, a handy guy and experienced founder of a TV repair shop in Gulshan, Dhaka, Bangladesh. He is mainly an expert in understanding and repairing different types of issues with Smart TVs and providing helpful insights on how to keep them in good working order. Read his Full Story.